Product Description
DC12 MITY-QC3 T400A Solar GO-BOX has a Powerpole output port and yellow Powerpole solar panel input port, a dual Powerpole port and a USB-QC3.0 Charger Port and DVM. This configuration can be ordered alone for your battery or with one of 3 sizes of Lithium Iron Phosphate (LiFePO4) batteries, 12, 15, and 20 Ah. The Red Powerpole connector is for power distribution to radios or other equipment requiring 12 VDC*. The connectors can be used as an input or output and can be used simultaneously. The Digital Volt Meter (DVM) to monitor the battery condition.
The USB-QC3.0 fast high current charging port keeps your phone or other USB devices charged. If your phone is the type that can communicate with the QC3.0 protocol, it will charge much faster than the standard USB port. If your phone is not so equipped, it will charge as with a standard USB charger.
The 150 Watt MPPT Solar Charge Controller is connected to the yellow Powerpole. This allows you to plug in your solar panel directly in without having to use an external solar charge controller. MPPT is Maximum Power Point Tracking and is a very efficient way to extract all the power from the solar panels. The Powerpole connector top position is yellow/black for panel input and the lower one is red/black for 12 VDC out.
The case is ruggedly constructed and is water resistant.
Do not use automotive type chargers or maintainers for this type battery. They will not charge the batteries properly.
The Bioenno AC to DC Power charger installed is a 14.6VDC, matched to the LiFePO4 batterie installed. The Bioenno batteries come with a PCM (Protection Circuit Module) ready for this type of charger.
Case Dimensions: Inside Outside
8.25" x 5.75" x 3.88" 9.38" x 7.63" x 4.63"
About the Battery
The Bioenno Power Lithium Iron Phosphate (LiFePO4) Battery Model BLF-Series is a state of the art 12V battery. The BLF-Series is designed for more stationary applications and higher power consumption portable electronics requiring a higher capacity and greater power output battery while demanding a battery which can reliably provide excellent performance over an extended service life. The battery has an integrated BMS (Battery Management System) which provides complete internal cell balancing, complete integrated protection along with integrated charge circuitry and boasts no EMI/RFI (Electromagnetic Interference/Radio-Frequency Interference) and is absolutely quiet!
BLF-Series Batteries Available for this MITY-GO-BOX Charger Supplied
BLF-1212AB 12 volts, 12 Ah, 4.20" x 4.10" x 3.00", 3.20 lbs. BPC-1502DC - 2 AMP
BLF-1215A 12 volts, 15 Ah, 5.35" x 4.21" x 3.00", 4.20 lbs. BPC-1502DC - 4 AMP
BLF-1220A 12 volts, 20 Ah, 6.22" x 4.21" x 3.18", 5.20 lbs. BPC-1504DC - 4 AMP
