Product Description
DC12 MAX T400 SOLAR GO-BOX:
Control panel configuration from left to right: Automotive power Port (Cigarette Lighter); Powerpole 12 Volt DC Input or Output; USB-QC3.0 and Type C Power Delivery Charger with DVM (Digital Volt Meter); Dual solar panel direct input to built-in 150 watt MPPT solar charge controller; Power switch, to remove power from the USB charger and DVM to prevent battery discharge during long term storage.
This configuration can be ordered alone or with one of 4 sizes of Lithium Iron Phosphate (LiFePO4) batteries, 20, 30, 40 or 50 Amp hours. The dual Powerpole connector is for 12 volt power distribution or as an input for charging the battery from another source. The automotive power port can be used the same way. The input and output can be used simultaneously. The USB QC3.0 and Type C Power Delivery charging port for fast charging or multiple charging protocols and keep your phone or other USB devices charged and a DVM to monitor the battery condition. Also an automotive Cigarette Lighter type power port for devices that use that type of connection such as a CPAP or 110 VAC Inverter.
The dual solar input (yellow Powerpole connector) connects directly to a built-in 150 watt MPPT charge controller. All you need is a solar panel and a cable and you are ready to go.
The case is weathe resistant.
The Bioenno Power charger supplied is a 14.6VDC, matched to the LiFePO4 battery installed. The Bioenno batteries come with a BMS (Battery Management System) ready for this type charger. Do not use automotive type chargers or maintainers for a LiFePO4 type battery. They will not charge the batteries properly and may void the warranty.
Case Dimensions:
Inside Outside
12" x 9" x 5.25" 13.63" x 11.63" x 6.0"
About the Battery
The Bioenno Power Lithium Iron Phosphate (LiFePO4) Battery Model BLF-Series is a state of the art 12V battery. The BLF-Series is designed for more stationary or portable applications and higher power consumption portable electronics requiring a higher capacity and greater power output battery while demanding a battery which can reliably provide excellent performance over an extended service life. The battery has an integrated PCM (protection circuit module) which provides complete internal cell balancing, over and under voltage and current protection. Complete integrated protection along with integrated charge circuitry and boasts no EMI/RFI (Electromagnetic Interference/Radio-Frequency Interference) and is absolutely quiet!
BLF-Series Batteries Available for the MAX GO-BOX
Battery Description Charger supplied Total Weight
BLF-1220A 12 volts, 20 Ah, 6.5" x 4.3" x 3.3", 5.3 lbs. BPC-1504DC - 4 AMP 10.9 lbs
BLF-1230A 12 volts, 30 Ah, 6.5" x 6.4" x 3.4", 8.0 lbs. BPC-1506DC - 6 AMP 13.8 lbs
BLF-1240A 12 volts, 40 Ah, 8.4" x 6.3" x 3.2", 10.4 lbs. BPC-1506DC - 6 AMP 16.3 lbs
BLF-1250A 12 volts, 50 Ah, 8.4" x 5.8" x 4.3", 13.3 lbs. BPC-1510A - 6 AMP 19.1 lbs
