DC12 MITY T2 GO-BOX, Powerpole, Automotive Port, 2.1A + 2.1A USB Charger Port and DVM, LiFePO4 Battery. This configuration can be ordered alone or with one of 4 sizes of Lithium Iron Phosphate (LiFePO4) batteries, 9, 12, 15, and 20 Ah. The case has a dual Powerpole connector for power distribution or charging input such as a solar charge controller or automotive power input. The input and output can be used simultaneously. The USB 4.2 Amp and Digital Volt Meter (DVM) to monitor the battery condition. The case is considered water resistant.
Do not use automotive type chargers or maintainers for this type battery. They will not charge the batteries properly.
The Bioenno AC to DC Power charger installed is a 14.6VDC, matched to the LiFePO4 batterie installed. The Bioenno batteries come with a PCM (Protection Circuit Module) ready for this type of charger.
Case Dimensions: Inside Outside
8.25" x 5.75" x 3.88" 9.38" x 7.63" x 4.63"
About the Battery
The Bioenno Power Lithium Iron Phosphate (LiFePO4) Battery Model BLF-Series is a state of the art 12V battery. The BLF-Series is designed for more stationary applications and higher power consumption portable electronics requiring a higher capacity and greater power output battery while demanding a battery which can reliably provide excellent performance over an extended service life. The battery has an integrated PCM (protection circuit module) which provides complete internal cell balancing, complete integrated protection along with integrated charge circuitry and boasts no EMI/RFI (Electromagnetic Interference/Radio-Frequency Interference) and is absolutely quiet!
BLF-Series Batteries Available for this MITY-GO-BOX Charger Supplied
BLF-1209A 12 volts, 9 Ah, 4.30" x 3.20" x 3.10", 2.60 lbs. BPC-1502DC - 2 AMP
BLF-1212AB 12 volts, 12 Ah, 4.20" x 4.10" x 3.00", 3.20 lbs. BPC-1502DC - 2 AMP
BLF-1215A 12 volts, 15 Ah, 5.35" x 4.21" x 3.00", 4.20 lbs. BPC-1502DC - 4 AMP
BLF-1220A 12 volts, 20 Ah, 6.22" x 4.21" x 3.18", 5.20 lbs. BPC-1504DC - 4 AMP